Sonique Bead King throw-off adapter desktop banner

Sonique Bead King throw-off adapter mobile banner

Sonique Drums Bead King adapter on an Acrolite

Sonique Drums Bead King adapter cover image

Sonique Drums Bead King adapter up close

Sonique Drums Bead King adapter hole spacing mobile graphic

Sonique Drums Bead King Adapter assembly

1 5

Bead King Beaded Snare Adapter

$68.00 AUD

New Arrival

Best Seller

Tax included. Shipping calculated at checkout.

The Bead King™ expands compatibility to other throw offs that also can use a 7/8" hole spacing. Its generous arch cutout accommodates a wide variety of bead profiles and longer mounting slots to accommodate variations in hole spacing as it relates to the location of the bead. It's easy to install and we include a complete hardware kit to get you upgraded and ready to play again in minutes.

Overview

The Bead King™ is an all aluminum, CNC machined adapter that is designed to retro-fit throw offs using the 7/8" hole spacing to beaded snares that typically use the traditional Ludwig hole spacing range of 2.00" to 2 11/16".

The Bead King™ Beaded Snare adapter is made from machined aluminum, weighing less than 1 ounce, and the mounting side matches the curvature of the snare drum. This design detail provides a perfect fit against the shell. The introduction of the Bead King™ now gives drummers the ability to retro-fit any NATO family throw off, or other throw offs to their favorite beaded snare.

Compatible with NATO, Dunnett, Trick, DW MAG, SJC Quick Throw, & others.
Hardware kit included

Throw Off Compatibility

Dunnett R-Class R4
Dunnett R-Class R5
Dunnett R7 Roto
DW Delta
DW Universal Mini-MAG
GEWA Piccolo
Gibraltar Dunnett R-Class R4
Gibraltar Dunnett R-Class R5
Gibraltar Dunnett R7 Roto
Gibraltar Piccolo
Ludwig P83 Elite Piccolo
NATO-1
NATO-1 XL
Nickelworks
SJC Quick Throw
Tama Linear Drive
Trick Single Step
Trick Multi-Step

Dimensions

[Imperial] Weight: .69 oz | Length: 3 1/32" | Width: 5/8" | Height: 25/64" | Fits snare depths: 5" - ∞

[Metric] Weight: 19.6g | Length: 76.8mm | Width: 15.87mm | Height: 10mm | Fits snare depths: 114.3mm - ∞

Hole Spacing

Snare Side:

(Metric): 50.8mm - 68.26mm
(Imperial): 2.0" - 2.6875"

Throw Off Side:

(Metric): 22.22mm
(Imperial): 7/8"

Hardware Kit

1 - Wrench
2 - M5 16mm Countersunk screws
2 - M4 14mm Countersunk screws
2 - Locking nuts
4 - Stainless Steel washers
2 - M3 12mm bolts
2 - M3 14mm bolts
2 - M3 18mm bolts

The countersunk screws are used for the throw off side. The bolts are used for the snare side. Three different bolt lengths are included to accommodate varying shell thicknesses.